SPECIFICATIONS

Application: Electric Bicycles/Scooters

Balancing Current: 100 mA

Brand Name: JIKONG

Certificate: CE FCC RoHS

Communication Port: Bluetooth

Communication Protocol: Modbus RTU

Compatible with: V19 Version PB Series Inverter BMS

Customized: Support

Dimension (L*W*H): 187x120x12 mm

Feature 1: JIKONG Display

Feature 2: JK BMS Display

Feature 3: JK BMS Touch Screen

Feature 4: JIKONG Touch Screen

Feature 5: JIKONG ACCESSORY

Model Number: JK-LCD-7.0-TTL-P

Place of Origin: Guangdong, China

Service: ODM OEM

Size: 7.0 inch

System Voltage: 12.8 V

Wholesale: Support

JIKONG JK BMS 7.0 Inch Smart Touch Screen LCD Display for PB Series V19 Version Energy Storage Smart Inverter BMS JIKONG Accessory

Note: Pls contact us if you need the PDF Document of the Manual,thank you.

BMS Simple Manual

1. Download app and manual

2. Hardware connection

3. Startup

4. Open the app and connect the device

5. Set the number of strings and battery type

6. Check the battery status

Download link-IOS: Search (JIKONG BMS) in the APP STORE

Download link-Andriod : Search (JK BMS) in the Google STORE

(1) Connect the protection board and battery pack according to the following wiring diagram,Make sure that the last power cord is also Connected to the main positive pole,The total voltage of the battery pack must be greater than 20V(Default BMS)/10V(4S BMS) before tarting up.

(2) Use the display activation button or additional switch to activate the BMS.

(3) Turn on GPS and Bluetooth on your mobile phone.

(4) Make sure your mobile Bluetooth is turned on, then turn on APP click on the top left corner of APP to search for devices, and click on the device name to connect to the default password: 1234.

(5) Parameters need to be set for the first start-up Setting requires a password, The default parameter is set to password 123456,Simply set the number of units and battery type.

(6) Once the parameters are set, go back to the real-time status page, check the battery status, no error message is prompted and normal operation,blue is the highest voltage, red is the lowest voltage.

Interface Function Description:

1. Temperature sensor interface: All models of JKBMS are equipped with

2. RS485 interface: All models of JK BMS are configured with

3. LCD interface: All models of JK BMS are equipped with

4. CAN interface: Only configurations with"CAN"in the model

5. Heating interface: Only configured with"Heat" in the model

Heating function description:

1.The heating function is achieved by detect the battery temperature,combined with low

temperature protection during charging,the status of the charger to achieve electricity Pool heating control function.

2.Not all BMSs support the connection heating function, only BMSs with "Heat" in their models support the connection heating function.

3.The heating interface requires an external heating film or charger.

The green cable is connect to the heating film, and the red and black cables are connect to the charger. The maximum heating power is 2A, and the maximum heating voltage is 100V

Heating on condition:

1. The battery temperature is lower than the low-temperature protection temperature for charge

2. By connect the heating film for heating, the APP will activate heating, which will consume battery power.

3. Heat through the charger,this is related to the protection board hardware and charger.

Please place an order first Confirm the technical status.